国产精品激情欧美可乐视频-亚洲免费国产午夜视频-亚洲成a∨人片在线观看不卡-人妻中文字幕av无码专区-国产尤物av尤物在线观看

Surface properties and treatment of plastic film

2021-12-08 13:39:55 浙江長海包裝集團有限公司 Viewd 2384

The application of plastic film in the packaging industry* is extensive. Plastic film can be used for food packaging, electrical product packaging, daily necessities packaging, clothing packaging, and so on. They have one thing in common, that is, color printing on plastic films, and multi-layer composite or vacuum aluminum plating as food packaging. Therefore, the surface free energy and wet tension of the plastic film are required to be high in order to facilitate the firm adhesion of printing ink, adhesive or aluminized layer to the plastic film; in the process of plastic film production and high-speed packaging, The surface of the film is required to have a certain friction performance to prevent the film from sticking or slipping; when used in the packaging of electrical appliances and electronic products, the film is required to have a certain anti-static performance and so on.


Surface tension of plastic film


The surface tension of the plastic film depends on the free energy of the surface of the plastic film, and the surface energy of the film depends on the molecular structure of the film material itself. Most plastic films such as polyolefin films (LDPE, HDPE, LLDPE, PP) are non-polar polymers with low surface free energy and low surface wet tension, generally about 30 dyne/cm. Theoretically, if the surface tension of the object is lower than 33 dyne/cm, ordinary inks or adhesives cannot adhere firmly, so the surface must be treated. Polyesters (PET, PBT, PEN, PETG) are polar polymers with high surface free energy and surface wet tension above 40 dyne/cm. However, for high-speed color printing or to increase the bonding force between the vacuum aluminized layer and the surface of the BOPET film, it is also necessary to perform surface treatment on the BOPET film to further increase its surface wet tension.


The surface treatment methods of plastic film include: corona treatment, chemical treatment, mechanical roughening, coating, etc. Among them, the most common method is corona treatment.


The basic principle of the corona treatment method is: by applying a high-frequency and high-voltage power supply between the metal electrode and the corona treatment roller (usually a high-temperature, ozone-resistant, and high-insulation silicone rubber roller) to generate electrical discharge, so The air ionizes and forms a large amount of ozone. At the same time, high-energy electric sparks hit the surface of the film. Under their joint action, the surface of the plastic film is activated and the surface energy increases. The corona treatment can increase the wet tension of the polyolefin film to 38 dyne/cm; the surface wet tension of the polyester film can reach 52-56 dyne/cm or more. The size of the surface wet tension of the corona treatment plastic film is related to factors such as the voltage applied to the electrode and the distance between the electrode and the corona treatment roller. Of course, corona treatment should be moderate, not that the higher the intensity of corona treatment, the better. It is worth noting here that air should be avoided between the plastic film and the corona treatment roller, otherwise the reverse side of the film may also be corona treated. The consequences of the reverse corona are: 1 may produce the anti-stick phenomenon of ink printing; 2 the transfer of the aluminized layer will occur when the aluminum is plated, and the transfer of the glue layer will occur when the glue is applied. The main measure to prevent corona on the reverse side of the film is to adjust the pressure of the rubber pressing roller in front of the corona treatment roller. The pressure at both ends of the pressing roller must be consistent and the pressure must be appropriate. In addition, the corona roller and the pressure roller must undergo a strict dynamic and static balance test, and the radial runout is required to be less than 0.05 mm. The purpose is to ensure that the plastic film enters the corona roller smoothly and prevents air from being trapped, thereby avoiding the phenomenon of reverse corona. .


主站蜘蛛池模板: 麻豆aⅴ精品无码一区二区| 天天天天做夜夜夜夜做无码| 天天日夜夜爽| 免费无码鲁丝片一区二区| 久久久久国产精品人妻aⅴ免费| 亚洲精品国产成人av| 中文字幕亚洲欧美专区| 狠狠躁夜夜躁人人爽天天不| 粗了大了 整进去好爽视频| 国产999精品久久久久久| 欧美黑人xxxx高潮猛交| 午夜dj在线观看高清在线视频完整版| 久久久久久亚洲精品a片成人| 浴室人妻的情欲hd三级国产| 亚洲日韩国产成网在线观看| 麻豆亚洲国产成人精品无码区| 久久精品国产精油按摩| 欧美片内射欧美美美妇| 精品国产成人av在线| 成人免费看www网址入口| 国产精品无码aⅴ嫩草| 亚洲欧美韩国综合色| 国产成人毛片无码视频软件| 兔费看少妇性l交大片免费| 无码精品、日韩专区| 国产午夜福利精品一区二区三区 | 亚洲精品综合一区二区三| 精品无人乱码高清| 又色又爽又黄高潮的免费视频| 丰满少妇aaaaaa爰片毛片| 欧美高清大屁股xxxxx| 久久精品人妻无码一区二区三区v 国产亚洲精品久久久久久入口 | 一个人看的www免费视频在线观看 久久久久亚洲精品男人的天堂 | 精品久久久无码中文字幕| 在线亚洲高清揄拍自拍一品区| www国产精品内射熟女| 欧美色欧美亚洲国产熟妇| av免费播放一区二区三区| 麻豆精品传媒一二三区| 午夜亚洲国产理论片_日本| 久久精品无码中文字幕|