国产精品激情欧美可乐视频-亚洲免费国产午夜视频-亚洲成a∨人片在线观看不卡-人妻中文字幕av无码专区-国产尤物av尤物在线观看

Adhesives for pharmaceutical packaging

2021-12-08 13:38:58 浙江長海包裝集團有限公司 Viewd 2472

1. Pressure sensitive adhesive

Suitable substrates for pressure-sensitive adhesives include paper and plastic films, such as polyvinyl chloride, polyethylene, polypropylene, polyester, polytetrafluoroethylene, polyimide, and cellulose acetate. Metals such as aluminum foil, copper foil, lead foil, etc.

The main components of pressure-sensitive adhesives include synthetic resin adhesives (including natural rubber, synthetic rubber, cellulose, polyacrylate), tackifiers (rosin, rosin ester, various petroleum resins, epoxy resins or phenolic resins), Plasticizers (chlorinated paraffins, phthalic acids), antioxidants, stabilizers, crosslinking agents, coloring agents and fillers, etc.

Early pressure-sensitive adhesives used in pharmaceutical packaging were mainly composed of natural rubber, and its formula was 100 parts of plasticized natural rubber, 75 parts of polypinene resin (melting point 70℃), 5 parts of petroleum resin and partially polymerized trimethyl Mix 2 parts of dichloroquinoline. The other formula is made up of 100 parts of plasticized smoke sheet rubber, 50 parts of zinc oxide, 75 parts of hydrogenated rosin, and a small amount of tackifier and plasticizer. Later, synthetic rubber and synthetic resin were used instead of natural rubber. Among them, acrylic esters and their copolymers are the most commonly used, such as acrylic copolymer emulsion high-strength pressure-sensitive adhesive. Butyl acrylate-2-ethylhexyl acrylate-vinyl acetate copolymer emulsion (composition ratio of 50:17:33) and 30 parts of 50% solid content ethylene-vinyl acetate-vinyl chloride copolymer emulsion (composition ratio (19:36:45) mixed, coated on the polypropylene film treated with corona discharge, and dried at 110°C for 1 minute to make a pressure-sensitive tape. The peel strength of this tape to stainless steel is 600 g/25 mm.

As the requirements for the hygienic performance of pharmaceutical packaging materials continue to increase, the adjuvants added to the natural rubber-proportioned adhesive have peculiar smell and some are toxic, and have not been used in the composite packaging of pharmaceuticals and food. However, acrylic pressure-sensitive adhesives still have certain advantages, such as one-component, no cross-linking and curing, no need to dispense glue, simple use, and unused glue will not be broken overnight or longer, as long as Keep it airtight and airtight. In addition, the surface of the adherend is excellent, and many non-polar materials such as plastics and metal materials can be adhered firmly with low surface tension. However, due to the wide variety of materials in composite pharmaceutical packaging, companies have turned to two-component polyurethane adhesives for the composite of polar plastic materials and non-polar materials.


2, polyurethane adhesive

Polyurethane adhesives have a high degree of elasticity. Compared with other flexible adhesives, they have better heat resistance, solvent resistance, cold resistance, chemical resistance, oxidation resistance and ozone resistance. It has a good affinity for metals, plastics, wood, rubber, and fabrics, so it is widely used, especially in the fields of medicine and food packaging. The most applications are plastic and plastic compounding, metal and plastic compounding, and blister packaging hot pressing.

The earliest application of polyurethane adhesive was in the 1960s, when food composite packaging was just on the market. When used as an adhesive, it was mainly divided into polyisocyanate, urethane prepolymer, and isocyanate modified polymer according to its composition. kind.

①Polyisocyanate

Usually triphenylmethane P-triisocyanate, hexamethylene diisocyanate, diphenylmethane-4, 4-diisocyanate or toluene diisocyanate, etc., these polyisocyanates are used seldom individually, mainly as cross-linking of rubber adhesives Agent, or as a curing agent for polyester and polyether polyhydroxy compounds. The polymers used in conjunction with it include polyacrylate, epoxy resin, xylene resin, polyphenol amine resin and so on.

②Urethane prepolymer

It is a partial reaction product of polyisocyanate and polyhydroxy compound. Because the end group of this polymer has NCO group, it can be cured in the presence of a suitable curing agent, or it can be cured by air moisture to form a single group Parts of adhesive.

③Isocyanate modified polymer

It is a linear polymer that has a hydroxyl group at its end by reacting a diisocyanate with a polyester or polyether that is more than difunctional. It is also called a thermoplastic polymer. According to the dosage form, polyurethane adhesives can be divided into two categories: one-component and two-component. The latter is better than the former in terms of adhesive strength. The two-component A component is mainly an isocyanate modified polymer, and the B component is also the urethane prepolymer that has been introduced. The polyol is mainly castor oil or polyethylene glycol. One-component can be divided into two categories, one is the direct use of the A component of the two-component, that is, the isocyanate modified polymer; the other is the carbamic acid formed by the reaction of diisocyanate and ethylene glycol Ester, which has the inherent good adhesion properties of short-chain compounds such as ethylene glycol.

 


主站蜘蛛池模板: 人妻少妇被粗大爽.9797pw| 国产精品 亚洲一区二区三区| 久久精品成人无码观看免费| 日韩人妻无码精品系列专区| 精品国产午夜福利精品推荐| 92国产精品午夜福利| 狠狠色噜噜狠狠狠7777米奇| 亚洲gv天堂gv无码男同| .精品久久久麻豆国产精品| 亚洲国产精品ⅴa在线观看| 国产福利一区二区精品秒拍 | 男人扒开女人腿桶到爽免费| 日本一道一区二区视频| 少妇放荡的呻吟干柴烈火免费视频 | 搡女人真爽免费视频大全| 国产内射999视频一区| av东京热无码专区| 国产精品日本一区二区不卡视频| 亚洲国内成人精品网| 久久精品国产一区二区三区| 热99re久久精品| 无码一区二区三区老色鬼| 香蕉视频在线观看亚洲| 亚洲欧美日韩在线一区| 日本高清无卡码一区二区| 久久亚洲精品成人av无码网站| 天天爽天天狠久久久综合麻豆| 久久婷婷色综合一区二区| 两个男人吮她的花蒂和奶水视频| 久久av无码精品人妻系列| 亚洲男人第一无码av网站| 琪琪777午夜理论片在线观看播放 久久九色综合九色99伊人 | 131美女mm爱做爽爽爽视频| 人妻少妇-嫩草影院| 日本少妇人妻xxxxx18| av国産精品毛片一区二区网站| 亚洲精品你懂的在线观看| 久久久精品午夜免费不卡 | 青青草无码精品伊人久久7| 9lporm自拍视频区| 欧美黑人巨大videos在线|